Aluminum veneer is a kind of decorative material for aluminum products, which is cut and bent, then welded, polished and sprayed with paint. Aluminum veneer can be used as curtain wall material or interior decoration material. Due to its light weight, high anti-corrosion strength and easy installation, aluminum veneer is widely used in architectural decoration. Aluminum veneer is now widely used in building curtain wall, building interior decoration, billboard, canopy and other places. Aluminum veneer is a commonly used building decoration material. Do you know the specifications and dimensions of aluminum veneer?
Aluminum veneer usually adopts 1 series pure aluminum series and 3 series aluminum manganese alloy series, and 5 series aluminum magnesium alloy series will also be used for decoration of some special projects. Category 1100 in 1 series belongs to pure aluminum series, which has good neutral energy and is soft and easy to process and shape. It is mostly used as aluminum plate base material in indoor and outdoor decoration of buildings, but its impact resistance is slightly weak and easy to scratch. While 3003 in 3 series and 5005 in 5 series are plates with different alloy components respectively, Compared with 1100, it has higher strength, better toughness and relatively higher price.
Aluminum veneer refers to the building material for indoor and outdoor decoration, which is formed by processing and forming the aluminum substrate through multiple processes, and then painted and sprayed on the surface. Its structure is mainly composed of panels, back stiffeners and installation connecting corner codes. It is mainly used in indoor and outdoor wall decoration, glass curtain wall backing plate, ceiling, beam and column wrapping, canopy, elevator edging and other parts.
Conventional thickness specifications of aluminum veneer include:
3mm thick finished aluminum veneer weighs about 8kg per square meter. When using, try to prevent external force impact and hard object scratch, which will affect the decorative effect.
Conventional dimensions of aluminum veneer include:
600 * 600mm, 600 * 1200mm, 1000 * 1000mm, 1000 * 2000mm, 1200 * 2400mm, 1200 * 1500mm, 1500 * 1800mm, 1500 * 3000mm, up to 2000 * 6000mm.
If the width is more than 1500, it is an extra wide size. The plate needs to be customized, and the cost is relatively high. It is not recommended to use it, but it can be used within 6m in the length direction. As long as the plate thickness is within the range of no deformation and tolerance, it is considered to ensure the flatness and safety of aluminum veneer during manual handling and transportation in the later stage.
- Thickness of outdoor aluminum veneer: generally 2.5mm and 3.0mm; Outdoor ground floor and podium: generally, the thickness is 2.0mm;
- Indoor wall aluminum veneer or indoor ceiling aluminum veneer: generally, the thinnest thickness is 1.2mm or 1.5mm.
Common colors of aluminum veneer :
Gray, white, shiny silver, black, silver gray, champagne, etc
Common surface treatment methods of aluminum veneer:
Fluorocarbon spraying, polyester spraying, powder spraying, wood grain heat transfer printing, imitation stone heat transfer printing, anodizing, etc.
Common modeling methods of aluminum veneer:
Arc, punching, spherical, curved, carved, hollowed out, pattern, etc.
The structure of conventional aluminum veneer is mainly composed of panel, stiffener and corner code. The corner code can be directly bent and stamped by the panel, or riveted on the small side of the panel. The reinforcing rib is connected with the electric welding screw behind the plate surface to make it a solid whole, enhance the strength and rigidity of the aluminum veneer, and ensure the flatness, wind resistance and earthquake resistance in long-term use. If sound insulation and heat preservation are required, efficient sound insulation and heat preservation materials can be installed inside the aluminum plate.
Wanda aluminum has the ability to produce and process aluminum veneers. If you have any needs, please consult us